How To Clean A Very Stained Toilet Bowl

One of the worst sights in your house is a stained bathroom bowl. Even if the bowl has correctly been cleaned, the stains can persist and make you are feeling as although the toilet is still dirty. Obdurate stains are tough to remove, and built up over time.

The finest thanks to eliminate stains in your rest room bowl is through a process of soaking and scrubbing. Soak your bathroom bowl with cleaner like vinegar, bleach, borax, or a product like CLR, scrub the stains with a rest room brush or abrasive pad, and flush the bowl to remove the cleaner and stains.

Depending on how stained your rest room bowl is, you may have got to repeat the above technique greater than once. During this article we are able to address:

  • Determining what type of stains you have
  • What is tough water
  • Why your bathroom bowl receives stained
  • The most efficient ways of cleaning your stained bathroom bowl
  • When to call a professional
  • How to protect your self whilst cleaning

What Type of Stain Is in Your Lavatory Bowl

If your rest room bowl is stained, first you should determine what style of stain it is. If it’s a stain from day-by-day use, it can most likely be effortlessly cleaned with a daily store-bought lavatory bowl purifier and a lavatory brush. This should be your first step in seeking to remove your stains, even if you think it’s a regular stain or not.

If the stains on your rest room bowl persist even after you’ve wiped clean it, then it’s probable that you have mineral stains from your plumbing.

Rust Stains

These may be resulting from a rusty component to your plumbing. The rust debris can turn your bathroom water brown, and leave rust stains on the aspects of your lavatory bowl. If it truly is the case, then now not simply will you want to scrub your toilet, you will want to touch a pro to examine the pipes in your bathroom.

Rusted pipes will need replacing, and the longer you leave them, the higher opportunity of further complications and costlier repairs.

Hard Water Stains

The stains in your bathroom bowl may be due to the tough water on your plumbing. Tough water is one of the such a lot typical motives that your bathroom bowl or bathtub will develop stains or soap rings.

What is Hard Water

There are two typical kinds of water in our households. These are known as tough water and soft water.

Soft water has little to no dissolved minerals in it. It’s much less abrasive to home home equipment and plumbing methods than hard water.

Hard water contains a excessive level of minerals, ordinarilly calcium and magnesium. Tough water can go away residue in your home equipment as those minerals increase over time. The calcium in tough water additionally reacts with cleaning soap to create a film. That’s often known as “soap scum”. This may building up over the years in sinks, bathtubs, dishwashers, and washing machines.

You could uncover that your garments and dishes are not popping out as clean as they ought to be after a wash, and which may be due to the fact there become not sufficient soap to vanquish the soap scum. When you live with tough water, you may discover yourself having to use extra cleaning soap to remove this slimy film.

When hard water is heated, the calcium can solidify and create hardened deposits of calcium carbonate. This can construct and harm your home appliances.

Hard water in your bathroom can trigger a similar cleaning soap scum and mineral building up as in different areas of your home.

Why Your Lavatory Bowl Receives Stained

Most lavatory bowls are made up of porcelain. Porcelain is a non-porous material that’s easy to clean, yet isn’t proof against the effects of tough water.

As hard water evaporates, the mineral content of the water is left behind. Over time, this can create stains in your bathroom bowl. That’s why often the stains would be earrings that sit down correct around the water level.

These stains are often called by means of extraordinary names.

  • Mineral deposits
  • Limescale
  • Hard water stains
  • Calcium construct up

Alternatively, your lavatory bowl may well be stained from the rust content material of your water. It is because as iron and other metals rust, they turn a copper colour. They lose constitution and debris will wreck off of the rusted objects. These rust debris then input the water, and stain your rest room bowl.

The Such a lot Efficient Methods of Cleaning Your Rest room Bowl

Whether your lavatory bowl is stained from rust or from tough water deposits, the style of cleansing them is similar.

There are 3 extraordinary systems to take while cleaning your bathroom bowl.

  • Natural solutions
  • Chemical or store bought products
  • Professional help

Cleaning Your Rest room Bowl With Healthy Products

If you desire to stick to healthy products to attempt and clear your lavatory bowl. Follow the stairs below.

Scrub Your Toilet

Go over the stains on your bathroom with a lavatory brush. This will loosen any particles that is easy to take off. Flush your rest room to remove the loosened debris.

Empty the Lavatory Bowl

Turn off the water supply valve to the toilet. Then, plunge the water within the bowl, this will strength the water in the bowl to be pushed into the drain. The bowl must be empty in order that the cleaners can take a seat on the stain directly.

Choose Your Lavatory Cleaner

Choose which natural product you would like to use in your stains. A few of the such a lot effective products are:

  • Vinegar. The acidity of vinegar can wreck down the mineral stains.
  • Baking soda. The abrasiveness of baking soda is amazingly effective while scrubbed into lavatory stains.
  • Borax. Borax is valuable as a purifier due to the fact whilst it’s combined with water, it reacts, and converts the various water molecules into hydrogen peroxide. In contrast to vinegar and baking soda, Borax isn’t secure for human consumption, so keep this cleaner far from the kitchen.

Apply the Cleaner

Once you’ve chosen your cleaner, your next step is utilising it to the stains.


If you’re utilizing vinegar, one of the best ways to apply it’s via a sprig bottle. In case you pour vinegar at the stains it will be harder to get the bottle in the correct places. A sprig bottle will also supply a more even application of the vinegar, and fewer of it will run off.

Spray the stains generously with vinegar.

Baking Soda

Baking soda sticks finest to surfaces while they are somewhat damp. Spray your bathroom bowl with water from a spray bottle, or splash water on it from the sink. Your rest room bowl may also nonetheless be wet from the water that turned into in it, so you’ll now not have to add anything.

Sprinkle the baking soda instantly onto the stains. Be sure your application is thick enough to hide the stains fully.


You could also desire to wet the stain’s surface before you observe the borax. It’s also a powder-like substance and could stick larger to the toilet bowl if it is damp.

The water is also imperative for the effectiveness of Borax, because it reacts with the water to create hydrogen peroxide, and that is the main rationale that Borax is so effective.

Apply Borax generously to the stains.

Vinegar and Baking Soda Mixture

You could also use a mix of vinegar and baking soda to maximize the effectiveness of the two products.

Spray the lavatory liberally with vinegar, then sprinkle the baking soda on top. The two will fizz as they meet. The acidic vinegar will work to loosen the stains, while the baking soda would be a very good abrasive agent while it’s time to scrub.

Let the Product Sit

The subsequent step is the easiest; leave your bathroom alone.

These products need time to react with the stains and loosen them up. 30 minutes is usually sufficient time for the products to arrive maximum effectiveness. Try to not disturb the product for the entire 30 minutes.

Scrub the Toilet

The next step contains elbow grease. Scrub your bathroom with an abrasive sponge, a pumice stone, or your lavatory brush. You will uncover it easier to try this whilst the bathroom is a touch wet, so feel free to spray the stains with water at this point.

You should see most of the stains disappearing as you scrub. Any stains that don’t disappear might either wash off when you flush the toilet, or could need an extra attempt.

Rinse the Toilet

Next, replenish the lavatory with water. To do this, flip the water resource for the lavatory again on, and flush. Repeat this two to three instances to completely rinse out the lavatory bowl. Hopefully, the stains will have disappeared. If not, repeat the method above or circulate onto a chemical product as validated below.

Cleaning Your Bathroom Bowl With CLR

CLR, which stands for Calcium Lime Rust, is an effective agent against both tough water stains and rust stains. It’s non-toxic, and contains no unsafe chemicals, yet nonetheless cleans efficiently.

How to use CLR depends upon wherein your stains are on your bathroom bowl. If they are above the water line, you may genuinely practice CLR to the stains and scrub them with a rest room brush. Allow the product sit down at the stains for two minutes after which flush the bathroom varied instances to effectively rinse away the surplus product.

It is crucial to not permit CLR take a seat at the bowl for longer than two minutes, as it can trigger harm to the porcelain finish.

If the stains in your rest room bowl sit down lower than the water line, then you’ll have to drain the bathroom water. To try this follow the stairs below.

  1. Turn the water source for the lavatory off
  2. Plunge the bathroom to strength the water down the pipe

Once the bathroom has been emptied of water, you can practice the CLR to the stains. Scrub the stains and permit the solution sit for two minutes. Turn the water source again on, and flush the toilet instantly to rinse the residual CLR out of the bowl.

If the stains persist, you may have to repeat the process, or use whatever more abrasive to wash with. Try out utilizing a pumice stone soaked in water, or a ball of metal wool. Take care not to scrub too hard, as you can harm the porcelain conclude of the toilet.

Why Bleach Might Now not Work on Your Hard Water Stains

The most efficient products opposed to hard water stains are acids. Acids will soften and dissolve the mineral deposits in the toilet. It really is what makes vinegar so effective opposed to the stains.

Bleach, however, is a base. In its concentrated form, it’s powerful sufficient to burn human dermis on contact. This identical product may not affect your tough water stains at all.

In fact, utilizing bleach on rust stains is a nasty idea. Bleach can assist rust stains set, and cause them to much more difficult to remove.

Cleaning Your Bathroom Bowl with Coca-Cola

As strange because it sounds, Coca-Cola is an effective product to apply against the tough water build ups in your bathroom. Coca-Cola is acidic, which, as we found out above, is what’s needed to clear tough water stains.

To use Coca-Cola opposed to your hard water stains, follow the instructions below.

  1. Turn off the water resource in your toilet
  2. Plunge the toilet to take away the water from the bowl
  3. Fill the bowl (at least above the hard water stains) with Coca-Cola
  4. Leave for a few hours, or maybe overnight
  5. Turn the water resource returned on
  6. Flush the toilet
  7. Scrub the toilet with the toilet brush to remove any stains that didn’t flush away
  8. Flush the bathroom lower back to rinse the bowl

When to Name a Professional

If you’ve attempted each of the methods above and the stains on your bathroom just won’t budge, your lavatory may be past the purpose of no return. You ought to name a pro plumber to get their opinion.

They ought to be capable of let you know in case your lavatory is a misplaced cause, and might be must be replaced. They could also have added pointers of methods to remove obdurate stains.

Even in case you were able to take away your stains, in the event that they were due to rust then you nonetheless must contact a professional. Old iron pipes, generally set up earlier than 1960, have been often made of iron. These pipes are particularly susceptible to rusting, and could possibly must be replaced.

Ignoring rust on your plumbing may end up in broad and expensive damage.

If the stains in your lavatory bowl are as a result of mold, there is the possibility of it to be hazardous in your health. A professional ought to even be contacted whilst you expect that you’re dealing with any source of hazardous mold or mildew.

How to Protecting Your self Whilst Cleaning

Many products which are efficient against tough stains in your rest room bowl will also cause irritation in your skin upon contact. It’s important to apply appropriate PPE (personal shielding equipment) while you’re using any kind of tough solution.

It’s also important to guard yourself opposed to germs and micro organism that is residing on your toilet.

To shield your hands from chemicals, use gloves like these Soft Scrub Rubber Gloves. They’re reusable, and are tremendously efficient as a barricade among your skin and your lavatory cleaner. Additionally they have raised rubber at the fingertips, which is beneficial for increasing your grip.

Rubber gloves should be lengthy enough to cover so much of your forearm, as your epidermis can get splashed with dirty water, and you may must reach a ways into the bathroom to clean each of the stains. Make sure to wash your hands with disinfecting soap in case you come in touch with bathroom water or cleansing chemicals.

If you have lengthy hair, tie it again earlier than cleansing your toilet. This manner chemicals don’t come in touch along with your hair and it doesn’t get damaged or discoloured. You additionally don’t desire your hair to touch the bathroom and get any unsafe bacteria on it.

If your rest room stains are resulting from mold, you may desire to take extra precautions while cleaning them. Wear a mask validated to block hazardous particles from entering your lungs.


To clean a very stained bathroom bowl, you ought to use the appropriate cleaning agents, time, and a touch elbow grease. Rest room bowls (and toilet seats) should be wiped clean typically to avoid the stains from becoming caked on, and hard to remove.

Let’s overview the steps to cleaning a hard lavatory bowl:

  1. Identify the kind of stain and clean the bowl regularly
  2. Apply your chosen cleaner to the stains
  3. Scrub the bowl with a bathroom brush, pumice stone, or metallic wool
  4. Flush and rinse the bathroom dissimilar times
  5. Repeat as needed to provide a deeper clear and to maintain your lavatory clear for the future
  6. Contact a professional if you assume you have rusty pipes or chronic mold